ASSEMBLY INSTRUCTIONS
2
STEP 5:
Bolt 10 x 25 - Qty. 4, Washer 10 x 20 - Qty. 8, Nut M10 - Qty. 4.
Apply the lower
crossbar through the above mentioned bolts and nuts.
IMPORTANT:
Do not tighten until fi nal assembly.
STEP 6:
Bolt 10 x 35 - Qty. 2, Washer 10 x 20 - Qty. 4, Nut M10 - Qty. 2.
Fasten the support
tongue to the lower crossbar using the listed bolts and nuts.
STEP 5 STEP 6
STEP 7:
Bolt 8 x 20 - Qty. 4, Washer 8 x 24 - Qty. 8, Nut M8 - Qty. 4
. Fasten the crankcase to
the frame, as shown in the photos.
STEP 8:
Bolt 10 x 25 - Qty. 2, Bolt 10 x 35 - Qty. 2, Washer 10 x 20 - Qty. 8, Nut M10 - Qty. 4.
Fasten the upper crossbar with listed bolts and nuts.
IMPORTANT:
Do not tighten
until
fi nal assembly.
STEP 9:
Bolt 10 x 50 - Qty. 1, Washer 10 x 20 - Qty. 2, Self lock nut M10 - Qty. 1.
Fasten all tie
rods of the upper reinforcement, as shown in the photo.
IMPORTANT:
Bolts and nuts
must not be tightened until the fi nal assembly.
STEP 5 STEP 6
