GM-FTDI2-LED16-C
P
RODUCT
M
ANUAL
7
www.gearmo.com
5)
Test your serial connection and use
1.6
Notes, Tips, Warnings, Safety, and Troubleshooting
Note
The USB C connector on the GM-FTDI2-LED16-C can only be used in a USB
Type-C port; it is not compatible with standard USB ports.
Tip
N/A
Warning N/A
Safety N/A
Troubleshooting
1)
Data communication failure
a)
Check to make sure the USB cable is connected properly.
b)
Make sure the RS-232 output interface connection is
correct.
c)
Make sure power is supplied to device.
d)
Make sure the wire terminal connection is secure.
e)
Make sure the indicator lights flash when receiving.
f)
Make sure the indicator lights flash when sending.
2)
Data missing or incorrect
a)
Check to see whether the data rate and format at
both ends of the communication equipment are
consistent.
