3. Install the mobile phone clamp
1) Place the mobile phone clamp
on the mounting plate and screw
the phone clamp into the locking
knob.
2) Rotate the angle adjusting knob
counter-clockwise to loosen and adjust the phone
clamp to your desired angle. Then rotate the knob
clockwise to tighten. The mounting plate can tilt
180° for the perfect angle.
Note:
Take special care when raising or lowering the
center column, if a camera or equipment is
mounted on the tripod. Never release the flip lever
lock without holding the center column. Failure to
follow these instructions could result in damaged
equipment.
6
Tighten
Loosen