VACUUM CLEANER ASSEMBLY
Note: Always disconnect your appliance from the mains and let it cool down
completely before putting on or taking off parts
1. Insert floor brush into the nozzle opening.
2. Insert tube into nozzle opening.
OPERATION
1. Make sure that all parts of the device are in place,
unwind the cord and connect the plug of the device to
the mains wall socket.
2. Press the on/off switch located on the main body of
the device to the on position “ I ” to activate the vacuum
cleaner. Your vacuum cleaner begins to operate.
Note: The suction hole must be open, free of any
obstructions at all times. Otherwise, the motor will
overheat and could become damaged.
USE OF ACCESSORIES
Floor nozzle - for vacuuming on flfl and fl surfaces.
Crevice tool - for cleaning radiators, corners, edges,
drawers, etc.
Summary of Contents for VC-S1603
Page 6: ...1 2 1 2 I...
Page 8: ...1 0 2 3 4 5...
