7
OVERVIEW
CONTROL PANEL
7. CHANNEL 1
Adjust the volume input of channel 1
(combination XLR/Jack input connection).
Ensure this dial is set to “MIN” before
connecting anything into the input socket.
Note – for unfiltered volume from the input
device, set to “MAX”.
8. CHANNEL 2
Adjust the volume input of channel 2
(combination XLR/Jack input connection).
Ensure this dial is set to “MIN” before
connecting anything into the input socket.
Note – for unfiltered volume from the input
device, set to “MAX”.
9. CHANNEL 3
Adjust the volume input of channel 3 (3.5mm
minijack and Bluetooth input connections).
Ensure this dial is set to “MIN” before
connecting anything into the input socket.
Note – for unfiltered volume from the input
device, set to “MAX”.
Note – channel 3 bypasses the EQ dials and
therefore the sound signal will be unaffected by
the EQ.
10. LINK (+ LED INDICATOR)
Turns the Bluetooth connectivity on and off, and
is indicated as such with the LED indicator.
See page 9 for more details.
11. TREBLE
Adjust the high frequencies of channel 1 and
channel 2.
Frequency adjustment: 7.5KHz, ±12dB.
12. BASS
Adjust the low frequencies of channel 1 and
channel 2.
Frequency adjustment: 150Hz, ±12dB.
13. MASTER
Adjust the overall output from the speaker.
Note – setting this dial to “MAX” for extended
periods of time may cause unwanted effects or
damage to the speaker.
14. POWER INDICATOR
This light will illuminate when there is mains
power connected to the device and the power
switch is in the on position.
15. CLIP
This light will illuminate when the speaker is
reaching the maximum volume. The light may
flicker on and off during performance. For
best results, it is advised that this light should
only illuminate very infrequently. If the light
illuminates regularly, turn the channel or master
volumes down until it stops.
CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 2
CHANNEL 3
CHANNEL 1
EQUALIZER
–12dB
+12dB
CLIP
TREBLE
LINK
MIN
MAX
LEVEL
MIN
MAX
LEVEL
MIN
MAX
LEVEL
–12dB
+12dB
BASS
MIN
MAX
MASTER
7
8
9
12
13
11
10
14
15
