Rear Panel Connectors
AUDIO OUT RIGHT AND LEFT (MONO)
These are the main audio outputs. A slide switch allows selection of -2dBm unbalanced floating outputs, or +4
dBm,600 Ohm balanced outputs.
MIXER EXT IN
Plug any instrument-level or line-level audio signal in this jack to combine with the oscillator and noise signals
prior to filtering.
MIX OUT/FILTER AUDIO IN
This is a TRS insert point that can be used to insert an effect between the output of the Mixer and the Input of
the Filters using a standard insert cable. The output of the audio mixer appears here, before being fed to the
filter. The Mixer output appears at the tip of this jack, the return to the Filters appears at the ring. If you plug
something into this jack, that breaks the normal connection.
ACCESSORY PORTS
INPUTS
This is a standard male DB-25 connector that provides the following control voltage and gate inputs:
Control Voltages:
•
VOLUME
•
PAN
•
FILTER CUTOFF
•
OSCILLATOR WAVEFORM
•
OSCILLATOR PITCH
•
MOD2 (EXTERNAL MOD SOURCE)
•
MOD1 (CONTROLS PEDAL/ON MOD BUS AMOUNT)
•
SAMPLE AND HOLD IN
•
ENVELOPES RATE
•
LFO RATE
•
T.S. X
•
T.S. Y
•
T.S. A
