9
16. EQ Mode
Change the Value of EQ Bass
[DATA CONTROL]
knob
b Change the Value of EQ Treble
[DATA CONTROL]
knob
Press [REVERB] and [CHORUS] buttons at the same time to enter EQ mode.
a.
Press [REVERB] button, the LED display the value of EQ bass, then use the
to adjust the value, range (-12~12) .
.
Press [CHORUS] button, the LED display the value of EQ treble, then use the
to adjust the value, range (-12~12) .
EQ
DATA CONTROL
EQ
DATA CONTROL
15. Chorus Effect
[DATA CONTROL] knob
The Chorus effect may be applied to each voice individually and will be retained even when
the power is turned off.
Press [CHORUS] button to open or close the chorus function, the LED will display: c-1.
Use the
to adjust the chorus type (c-1 ~ c-8).
To adjust the amount (depth) of the chorus effect, Press and hold down the [CHORUS] button
about 3 seconds, then use the
to adjust the desired amount (0-127).
[DATA CONTROL] knob
DATA CONTROL
CHORUS
CHORUS
REVERB
REVERB
CHORUS
REVERB
CHORUS
