![Gear4music DP-50 Owner'S Manual Download Page 54](http://html.mh-extra.com/html/gear4music/dp-50/dp-50_owners-manual_572750054.webp)
52
Bluetooth devices should be placed near and in direct view of the
Bluetooth receiver when initially set up. The distance and strength
of the signal will depend on environmental conditions. Please make
sure the volume of the piano and the Bluetooth device is turned up.
If you are unable to connect to your Bluetooth device, please make
sure that any other previously connected device has been
disconnected.
If you are still unable to connect, please turn the Bluetooth function
on your device off, and then back on to attempt to connect. To
change Bluetooth devices during normal operation disconnect the
first Bluetooth and then reconnect to the new device following the
above instructions.Please also note, due to differences in Bluetooth
technology, some Bluetooth enabled devices maybe incompatible,
function improperly, or may not support all features when used
with the wireless receiver.
NOTE
Troubleshooting
Please make sure the volume of the piano and the Bluetooth device is turned
up. If you are unable to connect to your Bluetooth device, please make sure
that any other previously connected device has been disconnected. If you
are still unable to connect, please turn the Bluetooth function on your
device off, and then back on to attempt to connect.To change Bluetooth
devices during normal operation disconnect the first Bluetooth and reconnect
to the new device following the above instructions.