4
SNARE DRUM ASSEMBLY
ITEMS REQUIRED:
1x Snare Drum
1x Snare Drum Arm
1 – The snare drum is already assembled, it will
just need mounting to the drum kit. Insert the
long section of the snare drum arm into the first
mount on top of the bass drum (the one nearest
to the pedal side of the bass drum). Face the
arm to the left if you are right-handed, the
opposite if you’re left-handed. Tighten using the
wing nut. Mount the snare drum on the point of
the arm and tighten using the wing nut.
TOM TOM DRUM ASSEMBLY
ITEMS REQUIRED:
1x Tom Tom Drum
1x Tom Drum Arm
1 – Your tom tom drum will arrive setup just like the
snare drum. Repeat the steps for snare drum
assembly, using the middle mount on the bass
drum. Point the drum in the opposite direction
to the snare.
CRASH CYMBAL ASSEMBLY
ITEMS REQUIRED:
1x Crash Cymbal
1x Cymbal Arm
1 – Insert the cymbal arm into the remaining
mounting hole on the bass drum. Tighten the
wing nut on the bass drum. Unscrew the wing nut
at the top of the cymbal stand, then remove one
of the two felts.
2 – Place the crash cymbal onto the top of the stand,
resting it on the second felt. Place the removed
felt on top of the cymbal then screw on the wing
nut to secure. Do not over-tighten this cymbal,
it requires some movement when hit.
Over-tightening can cause damage to the
cymbal. The angle of the cymbal can be adjusted
by altering the cymbal join on the stand.
Summary of Contents for CHILDREN’S DRUM KIT
Page 1: ...CHILDREN S DRUMKIT SETUPGUIDE...