10
DRUM STOOL ASSEMBLY
ITEMS REQUIRED:
1x Drum Stool (three parts)
1.
Take the base of the stand, undo the wing
nuts and splay the legs. Set this on the
ground upright.
2.
Take the height adjustment pole (which has
5 holes). Use the bolt, washer and wing nut to
secure it into the base. To do this, enter the pole
into the base and place the bolt through the
desired hole, then use the washer and wing nut
to secure. It may take a few attempts to get the
desired height for the user.
3.
Place the saddle on top of the height-adjustment
pole and tighten using the wing nut under the
seat. Make sure this is fastened securely.
NOTE
– Your drum kit is now set up and will
simply need tuning before playing.
Drum and cymbal positioning is a personal
preference and the layout of a drum kit can
vary. However, please feel free to refer to the
images on our website for some suggestions.
For more information and guidance on tuning
your drum kit, please visit our website
at www.gear4music.com
Summary of Contents for BDK STARTER KIT
Page 1: ...BDKSTARTERKIT SETUPGUIDE ...
