GEAR4 ONE-YEAR WARRANTY
Disruptive Hong Kong Limited, trading as GEAR4, warrants this product to be free from defects in workmanship
and materials at the point of sale. Subject to this product being used in accordance with its instructions for use,
the product shall continue to be free from defects, for a period of one (1) year from the date of original purchase.
Any damage or defects caused by a failure to follow the instructions which relate to this product or as the result
of an accident, abuse, misuse, misapplication, product modification, faulty ancillary equipment, improper voltage
or current, lightning or other acts of God, commercial non-home use, normal wear and tear, shipping damage
or loss, damage to digital media players or damage caused by the actions of anyone other than Disruptive Hong
Kong Limited are expressly excluded from the warranty stated above. Disruptive Hong Kong Limited will, at
its sole election, repair or replace any product that proves to be defective in either or both of workmanship or
materials and as covered by this warranty. If the product is no longer manufactured or is out of stock at or after
the time Disruptive Hong Kong Limited learns of the warranty claim, Disruptive Hong Kong Limited may, at its
sole election, replace your product with a similar product. Disruptive Hong Kong Limited’s liability is limited to the
repair or replacement, of any defective product under warranty and any incidental or consequential damages are
expressly excluded to the fullest extent permitted by law. This warranty is not transferable and does not extend
to users other than the person who originally purchased the product. Nothing in this manual shall limit or exclude
liability of Disruptive Hong Kong Limited for death or personal injury resulting from Disruptive Hong Kong Limited’s
negligence, for fraud or fraudulent misrepresentation or breach of the terms implied by Section 12 of the Sale of
Goods Act 1979. This warranty gives you specific legal rights in addition to the ones afforded you by the laws of
your country. This warranty is not intended to operate to limit such legal rights.
WARNING
To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. The apparatus shall not be
exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
Use of controls or adjustments of performance or procedures other than those specified may result in hazardous
radiation exposure. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
UNPACKING AND INSTALLATION
Unpack your unit carefully. We recommend that you save the packaging in case you ever need to store your unit.
To avoid damage, never place the unit or its batteries near radiators, in front of heating vents, under direct sunlight
or near water.
FOR YOUR SAFETY
•
When disconnecting the power supply, pull the plug first. Do not pull the cord by itself.
•
Never handle the power plug with wet hands, as this could cause fire or electric shock.
•
Refer servicing to qualified personnel only.
•
Do not open the housing.
•
Do not twist or pinch the power supply cord. If the plug or power supply cord needs to be replaced, ensure
that it complies with the manufacturer’s recommendation.
•
Unplug the unit during lightning storms and when unused for extended periods of time.
•
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device
shall remain readily operable.
DISPOSAL
According to the European WEEE Directive (2002/96/EC) and Battery Directive (2006/66/EC), all electrical
and electronic products and batteries must be collected separately by a local collection system. Do not
dispose of these items with your normal household waste. Follow local regulations for safe disposal.
The wheeled bin mark indicates that this product should not be disposed with other household
waste throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmental safe recycling.
FCC RULES
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference and
2) This device must accept any interference received, including interference that may cause
undesired operation.
INDUSTRY CANADA
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including interference that may cause undesired operation of
the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of
a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This
Class B digital apparatus complies with Canadian ICES-003.
AUSTRALIAN CONSUMER LAW
In Australia, the Trade Practices (Australian Consumer Law) Amendment Regulations 2010 (No. 1) apply.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
RETURN POLICY / WARRANTY SERVICE
Warranty claims will only be valid when proof of purchase is supplied to Disruptive Hong Kong Limited to
evidence that the product was purchased from an authorised Disruptive Hong Kong Limited dealer and that
the claim is within one (1) year of purchase. To make a warranty claim you must first contact Disruptive Hong
Kong Ltd, Rm 2002, 20/F King Palace Plaza , 52A Sha Tsui Road, Tsuen Wan, Hong Kong stating your name,
full postal address, contact telephone number, the name of the product and its serial number, date and place
of purchase and a detailed description of the problem you are experiencing. If the defect is covered by this
warranty then you will be provided with an authorisation number and instructions for return shipment. Where
possible, you must send to Disruptive Hong Kong Limited the damaged or defective product. The returned
product MUST be accompanied by the original proof of purchase. We highly recommend that you retain a
copy of this proof of purchase for your records. Disruptive Hong Kong Limited shall not be responsible for lost
or damaged products during shipment. Any product returned without the original proof of purchase will be
returned without being examined or tested and such return shall be at the customer’s expense. To avoid any
additional charges, all returns and exchanges must include the original packing materials, product box, all
included accessories which may include, but not necessarily be limited to, power adapters or power cords,
connecting cables, remote controls, adapters, inserts, cards and instruction manuals. The absence of any
of the aforementioned items may mean that you incur a charge for their replacement. Disruptive Hong Kong
Limited shall not be liable for any indirect or direct consequential loss.
Bluetooth
XUBE
Not paired
ON
1
2
3
USB
