3
User Manual | Xorb Wireless | GEAR4
■
Power On, connected via Bluetooth - LED
solid blue.
■
Pairing Mode - LED flashes blue twice.
■
Energy Saving mode - LED OFF.
2.1A USB Charging:
■
Charge your Smartphone, Tablet or Music
player using the 2.1A charging port on the
speaker.
■
Simply plug your charge cable into the back
of the speaker and then into your device.
Energy Saving Mode
■
If music is not playing or is very low for 1 hour
this product will automatically go into Standby
Mode to help conserve energy. The LED will
be off in Standby Mode.
■
Turn the speaker off and on again to wake up.
Register your Xorb Wireless speaker to activate
your warranty and receive product updates at
www.gear4.com/register
Copyright © 2012 Disruptive Limited. All rights
reserved. Reproduction in part or in whole
is prohibited.
GEAR4 and Xorb are trade marks of
Disruptive Limited.
WARNING
To reduce the risk of fire or electric shock, do
not expose this unit to rain or moisture.
CAUTION
Use of controls or adjustments of performance
or procedures other than those specified may
result in hazardous radiation exposure.
Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
sunshine, fire or the like.
UNPACKING AND INSTALLATION
Unpack your unit carefully. We recommend that
you save the packaging in case you ever need
to store your unit. To avoid damage, never
place the unit or its batteries near radiators, in
front of heating vents, under direct sunlight or
near water.
FOR YOUR SAFETY
‒ When disconnecting the power supply, pull
the plug first. Do not pull the cord by itself.
‒ Never handle the power plug with wet hands,
as this could cause fire or electric shock.
‒ Refer servicing to qualified personnel only.
‒ Do not open the housing.
‒ Do not twist or pinch the power supply cord.
If the plug or power supply cord needs to be
replaced, ensure that it complies with the
manufacturer’s recommendation.
‒ Unplug the unit during lightning storms and
when unused for extended periods of time.
DISPOSAL
According to the European Directive 2002/96/
EC all electrical and electronic products must be
