8
CDB-50 User Manual | GEAR4
For use with CD:
Slide the switch on the side of the speaker
■
to select CD mode.
Carefully insert your disc into the CD slot,
■
the disc will automatically be read.
To play or pause a track – press
■
on the
speaker or remote control.
To stop a track – press
■
■
on the speaker or
remote control.
To scan through tracks – press
■
/
on the
speaker or remote control.
To adjust the volume – turn the VOLUME dial
■
on the speaker.
Repeat / Random play:
Press either the
/
buttons on the remote
control or P-MODE on the speaker:
To repeat the current track – press
■
or P-MODE once, REPEAT will appear on
the screen.
To repeat the whole CD – press
■
or
P-MODE twice, REPEAT ALL will appear
on the screen.
To play tracks at random – press
■
or
P-MODE three times, RANDOM will appear
on the screen.
To clear the function – press P-MODE
■
four times.
To program specific tracks:
Load the CD you wish to program and make
■
sure it is not playing.
Press the PROG button once, the display
■
will flash.
Use
■
/
to find the track you wish to
programme (Press PROG to store).
Repeat above step until you have stored all
■
the tracks you wish to store.
To play the stored sequence, press
■
.
To clear the memory, press the
■
■
button once.
For use as a radio:
Extend the radio antenna.
■
Slide the switch on the side of the speaker
■
to select TUNER mode.
Slide the FM ST / MW Band dial on the side
■
of the speaker to select either FM or MW.
Use the TUNING dial on the speaker to scan
■
through frequencies.
Use with other
audio devices:
Slide the switch on the side of the speaker
■
to select AUX mode.
