6
CHARGING THE DIGITAL KEYCHAIN
NOTE:
Please be sure that you close all the applications on your computer before you begin the
installation process. Please charge your Digital Keychain by connecting the enclosed USB cable
to your computer following the instruction below for a minimum of 4 hours prior to first use. Each
full charge will last for 2 hours of viewing time. The actual charging time varies depending on the
level of discharge. The life cycle of the internal rechargeable battery is 400 charges.
1. Plug the USB mini-B connector of the enclosed USB cable to your Digital Keychain.
2. Connect the USB Type-A connector to an available USB port on your computer. Your
keychain will detect the connection and prompt you whether to charge the picture viewer or
to connect to the computer for data transfer. Select “
USB Power
”.
3. Your digital keychain will charge automatically.
Note
: When the battery is nearly full at the end of the charge cycle, your digital keychain will
continue to use a very low current to ensure better battery life. Your digital keychain might
continue to show that it is being charged. It is considered at full charge after 4 hours of
charging time.
SOFTWARE INSTALLATION:
For Windows
®
2000, XP, Vista
1. Turn on your computer.
2. Insert the enclosed driver CD into the CD-ROM drive of your computer.
3. The Software CD folder will pop out, double-click the “
PC AP
” folder to open the folder.
4. In the “
PC AP
” folder, double-click “
Setup
”, the Photo Viewer V2.08 Setup Wizard will
appear, follow the onscreen instructions to complete the installation.