6
Control settings.
Power
Press to “wake up” the display. If the display is active, press to put the washer into standby mode.
NOTE:
Pressing
Power
does not disconnect the appliance from the power supply.
1
2
Start/Pause
Press to start a wash cycle. If the washer is running, pressing it once will pause the washer and unlock the door. It will take a
few seconds for the door to unlock after pressing
Pause
. Press again to restart the wash cycle.
NOTE:
If the washer is paused and the cycle is not restarted within 15 minutes, the current wash cycle will be cancelled.
NOTE:
The washer performs automatic system checks after pressing the
Start
button. Water will flow in 45 seconds or less.
You may hear the door lock and unlock before water flows; this is normal.
3
Wash Cycles
The wash cycles are optimized for specific types of wash loads.
The chart below will help you match the items to be washed with the best wash cycle settings.
For optimal performance, select the cycle that most closely matches the items being washed.
Selections and options shown in
bold
are the suggested settings for that cycle.
*Some cycles and options may not be available on some models.
Items to Wash
Cycle
Soil
Level
Wash Temp
Spin Selection
Options Available
Cycle Details
Cycle for normal,
regular, or typical
use for washing
up to a full load
of normally soiled
cotton clothing.
Normal
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Extra Hot
Hot
Warm
Cold
Tap Cold
Extra High
High
Medium
Low
No Spin
Stain Removal Guide
Prewash or Presoak
Add Steam
Time Saver
Extra Rinse
Delay Wash
Tumble Care
Overnight Dry
Cycle for normal, regular, or typical
use for washing up to a full load
of normally soiled cotton clothing.
Choose the Heavy or Extra Heavy
soil level selection and Warm or
Hot water temperature selection as
appropriate for your clothes load for a
higher degree of cleaning.
Whites and
household linens.
Whites
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Extra Hot
Hot
Warm
Cold
Tap Cold
Extra High
High
Medium
Low
No Spin
Stain Removal Guide
Prewash or Presoak
Add Steam
Time Saver
Extra Rinse
Delay Wash
Tumble Care
Overnight Dry
Cycle tailored to clean and brighten
your whites.
Add Garment
(on some models)
If you need to add a garment after the cycle has started, press the
Add Garment
button and the unit will unlock the door, allowing
additional garments. The
Add Garment
feature is only available when the LED is lit on the button. After a certain point in the cycle, the
LED will not be lit any longer and adding a garment is not allowed.
(cycle options vary by model)
(appearance will vary)
Getting Started
1
Load clothes into your washer
and close the door.
2
Press Power to turn on the washer.
If the screen is dark, a press of the
Power
button will “wake up” the display.
3
Turn the knob to the desired cycle or
use My Cycle (on some models) to
program or recall your favorite cycle.
4
Open the dispenser and add
detergent, bleach and fabric
softener, as desired.
5
Press Start to begin the wash
cycle.
The machine will weigh
your clothes and add the proper
amount of water. When the wash
cycle is finished, the door will
unlock.