GEAppliances 26, Owner'S Manual And Installation

Page: 23 / 128

23
Installation Instructions
DIMENSIONS AND SPECIFICATIONS (for
23‘ CustomStyle
™
models)
DIMENSIONS AND SPECIFICATIONS
INSTALLING THE REFRIGERATOR
REFRIGERATOR LOCATION
• Do not install the refrigerator where the
temperature will go below 60°F (16°C) because
it will not run often enough to maintain proper
temperatures.
• Do not install the refrigerator where the
temperature will go above 100°F (37°C) because
it will not perform properly.
• Do not install the refrigerator in a location exposed
to water (rain, etc.) or direct sunlight.
• Install it on a floor strong enough to support it
fully loaded.
CLEARANCES
Allow the following clearances for ease of
installation, proper air circulation and plumbing
and electrical connections:
23‘/25‘ 23‘ (33” wide),
CustomStyle
™
25‘, 26‘, 27‘, 29‘
Sides 1/8” (4 mm) 1/8” (4 mm)
Top 1” (25 mm) 1” (25 mm)
Back 1/2” (13 mm) -1” (25 mm)
70
1
ø
4
” (178.4 cm)
36”
(91.4 cm)
24” (61 cm)
24” (61 cm)
Cabinet
Water
Electrical
3/4” (19 mm)
Airspace
(1/2” [13 mm] Gap
+ 1/4” [6 mm] Wall
Plates)
25” (63.5 cm)
Countertop
DIMENSIONS AND SPECIFICATIONS (for
25‘ CustomStyle
™
models)
* 72
1
/
4
” (183.5 cm) required for full adjustment
of mobility wheels. If cabinets installed above
refrigerator have doors that are flush to the
top of the opening for the refrigerator, then
an additional 1/8” may be required to provide
clearance for cabinet doors to open freely.
36”
(91.4 cm)
24” (61 cm)
72
1
ø
4
” (183.5 cm)*