Using the clock and timer.
(on some models)
24
Operating Instructions
Installation Instructions
Safety Information
Troubleshooting T
ips
Customer Service
The clock must be set for the automatic oven timing
functions to work properly. The time of day cannot be
changed during a timed baking or self-cleaning cycle.
To Set the Clock:
Press the
CLOCK
pad.
Press the
HOUR
and
MIN.
or
SET TIME +/-
pads.
Press the
CLOCK
pad to start.
3
2
1
Make sure the clock is set to the
correct time of day.
To Set the Timer:
Press the
TIMER ON/OFF
pad.
Press the
HOUR
and
MIN.
or
SET TIME +/-
pads
until the amount of time you want shows in the
display. The timer will start automatically within
a few seconds of releasing the pad.
To Reset the Timer:
If the display is still showing the time remaining,
you may change it by pressing the
HOUR
and
MIN.
or
SET TIME +/-
pads until the time you want appears in
the display.
If the remaining time is not in the display, recall the
remaining time by pressing the
TIMER ON/OFF
pad and
then pressing the
HOUR
and
MIN.
or
SET TIME +/-
pads
until the new time you want shows in the display.
To Cancel the Timer:
Press the
TIMER ON/OFF
pad once. To cancel the
timer press the
TIMER ON/OFF
pad again and hold
for 4 seconds.
2
1
The timer is a minute timer only.
The timer does not control oven
operations. The maximum setting on
the timer is 11 hours and 59 minutes
or 9 hours and 50 minutes, depending
on your model.
End of Cycle Tones
(on some models)
Clear the tones by pressing the pad of the function you
are using.
or
