- 7 -
- 8 -
Charging
Connect the micro USB to the Kitsune charge port. If
Kitsune is charging the LED will pulse red slowly until fully
charged. When fully charged the LED will be off. Charge times
vary and take up to 2 hours for a full charge.
Kitsune does not fully turn off for security and pairing
purposes so charging should be performed when not in use.
Powering On & Off
Kitsune does not have conventional power on and off
buttons. To power it the specialized Phrazer
Crypto-Magnetic Key must be put 1 inch over the
hall effect switch. This is located right near the left
side ear cup LED. When the power is off and it is
disconnected from a charger, the Kitsune's LED
will also be off. When started the LED will light.
LED Status
●
LED
- Used to indicate the status of Kitsune (ON, OFF,
pairing, charging, ect.)
●
Ear Cups
- Part that goes over the ears and emits sounds for
the user
●
Crypto Control Switch
- Located under the LED; this
changes the mode of Phrazer using the Crypto-Magnetic Key (i.e.
ON/OFF)
●
Charging Port
- Micro-USB B used to charge Kitsune
●
Microphone
- This is used to pick up environmental sound
and relay to the user
●
Authority Mode Button
- Once paired with a Phrazer it will
enable environmental sounds around the user
Using Kitsune
