Installation and Setting into Operation
Self-Cleaning
26
GEA Breconcherry Motor-driven Orbital Cleaner TMC 45/TMC 85
Edition 18/12/2012
Setting into Operation
Requirement
x
Before setting the unit into operation, check the voltage data, the fuse
rating and the supply line.
x
Avoid water hammers in the supply pipe.
CAUTION
Hot and aggressive liquids are discharged from the cleaner
Danger of injury
Î
Make sure nobody stands in the area of action of the nozzles.
Î
The machine may only be operated in a vessel intended for this purpose.
Carry out the following steps:
Î
Connect the cleaner and set it into operation.
9
TIP
The cleaner's direction of rotation is counter-clockwise.
Self-Cleaning
Liquid emerges from the fixing screw for the drive shaft, the nozzle disk and
from the annular gap of the fixing thread of the machine head during the
cleaning operation (intended for self-cleaning).
