3.8
Configuration
The configuration is used to set up compressors and other devices for the project. The configuration user inter-
face is detailed in Section 2.14, Page 95. Below is a breakdown of the sections and fields that may be custom-
ized in the configuration. A user must be of Admin level in order to modify any of these options.
3.8.1
Panel Configuration
When this tile is clicked a scrollable screen will appear which contains all information pertaining to the project.
The information is divided into seven sections, which are detailed below. To return to the tile display, the user
must click the
Close
button in the lower right hand corner of the screen.
Project Details
fig.104:
Project details options
1.
Project Number
This text box is used to display the GEA project number that corresponds to the project. The number
stored in this field will be displayed in the window’s title and on the tile displayed in the main options
screen.
2.
Project Name
This text box is used to display the unique name of the project. This field will only be utilized in certain
countries.
3.
Drawn By Initials
This text box is used to display the initials of the drafter who created the project drawings.
4.
Approved By Initials
This text box is used to display the initials of the engineer responsible for overseeing the project.
Instruction Manual | GEA Omni™
Control panel
Control
Configuration
GEA Refrigeration North America, Inc. | E_806550_2 | Generated 12.01.2016
183
Summary of Contents for Omni
Page 1: ...Control panel GEA Omni Instruction Manual E_806550_2 ...
Page 238: ......
