manualshive.com logo in svg

GEA GTR03BL series, Owner'S Manual And Installation Instructions

Share
Download
GEA GTR03BL series Owner'S Manual And Installation Instructions Download Page 11

11

Preparing to install the refrigerator.

Top Cover Support

Top Cover Support

Top Cover

Top Cover 

Middle Hinge

Middle Hinge

Adjustable Legs

Adjustable Legs

Freezer Door

Freezer Door

Fresh food  Door

Fresh food  Door

J-shaped hinge 

J-shaped hinge 
Support Mounted 

Support Mounted 
under FZ 

under FZ 
Door on left side

Door on left side

J-shaped hinge 

J-shaped hinge 
Support Mounted 

Support Mounted 
under FZ 

under FZ 
Door on right side

Door on right side

2 Plug Buttons

2 Plug Buttons

Door Reversal

1. Remove the two screws from under the 

screw caps located on the top cover.

2. Remove the two screws from the back of 

the top cover and remove top cover.

3. Remove the top hinge by removing the 

two screws, as shown.

4. Remove the freezer door by lifting off of 

the middle hinge.

5. Remove the J-shaped hinge support on 

the bottom of the freezer door. 

6. Install new J-shaped hinge support on 

the opposite side of the freezer door 
bottom. The new J-shaped hinge 
support and mounting screw are 
located in a zip lock bag that is shipped 
with the refrigerator.

7.  Remove the two screws from the top

cover support. Install top cover support
on the opposite side of refrigerator. 

8.  Remove the middle hinge. Remove plug

buttons from the opposite side of
refrigerator. Re-install plug buttons in the
original hinge mounting holes.

Door Reversal (cont.)

9. Remove the fresh food door by lifting 

off the bottom hinge.

10. Remove both adjustable legs.

11. Remove the bottom hinge and re-install 

on the opposite side of the refrigerator. 

12. Re-install the adjustable legs. Insure 

that the smaller leg is on the same side 
as the bottom hinge.

13. Place the fresh food door on the bottom 

hinge.

14. Place the bottom peg of the middle 

hinge in the fresh food door. Re-install 
middle hinge. Make sure the fresh food 
door is aligned with the refrigerator 
cabinet before tightening screws. 

15. Place the freezer door on the top peg of 

the middle hinge. Place the top hinge 
peg into the freezer door. Re-install top 
hinge. Make sure the freezer door is 
aligned with the refrigerator cabinet 
before tightening screws.

16. Re-install the top cover with four screws.

17. Replace the screw caps.

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

Installation Instructions

Summary of Contents for GTR03BL series

















Reviews:

No comments

Brands by name

Popular brands

Load more brands