manualshive.com logo in svg

GEA Fury 602, Operating Instructions Manual, Page: 6 / 44

Share
Download
GEA Fury 602 Operating Instructions Manual Download Page 6

Notes for the Reader

Symbols and Highlighting

6

  

  

Operating Instructions · GEA Index Cleaner Fury 602

Edition 01/08/2016

Symbols and Highlighting

In these Operating Instructions, important information is highlighted by symbols or 
special formatting. The following examples illustrate the most important types of high-
lighting.

DANGER

Warning: Fatal Injuries.

Failure to observe the warning can result in serious damage to health, or even death.

The arrow identifies a precautionary measure you have to take to avoid the hazard.

EXPLOSION HAZARD

Warning: Explosions.

Failure to observe the warning can result in a severe explosion.

The arrow identifies a precautionary measure you have to take to avoid the hazard.

WARNING

Warning: Serious Injuries.

Failure to observe the warning can result in serious damage to health.

The arrow identifies a precautionary measure you have to take to avoid the hazard.

CAUTION

Warning: Injuries.

Failure to observe the warning can result in minor or moderate damage to health.

The arrow identifies a precautionary measure you have to take to avoid the hazard.

IMPORTANT NOTE

Warning: Damage to Property.

Non-observance of the warning note can cause serious damage to the cleaner or in the 
vicinity of the cleaner.

The arrow identifies a precautionary measure you have to take to avoid the hazard.

Summary of Contents for Fury 602













































Reviews:

No comments