Maintenance
Adjust fingers of the power steering mechanism
2018-9015-001
09-2016
9.15
Check parallel bars springs adjustment
Before each use
● Pull the spreader in a straight line to
align the spreader and the tractor
wheels;
● Position the parallel bars (1)
perpendicular to the flat bar support
(2) by adjusting the eye bolts (3).
The springs (4) must be straight, not
hanging nor stretched. Make sure
the parallel bars remain
perpendicular.
2
1
3
3
4
9.16
Adjust fingers of the power steering mechanism
Every 200 hours of use
● Align the tractor draw bar with the
spreader power steering hitch by
moving the tractor in a straight line.
Make sure the tractor and the
spreader are perfectly aligned;
● Loosen the square head bolts (1) to
adjust the fingers (2) properly;
● Place finger to set a space of 1/16”
[1.5 mm] between the finger and the
draw bar. Secure the finger by
tightening the square head bolt (1)
and lock it with the jam nut;
● Repeat these steps for the other
finger.
1
2
1/16” [1.5 mm]