Maintenance / servicing
53
BA.10A.CNY.001.01.10.GB
20. Fit the suction cover 0162.00.
Grease threads of the tie bolts 0905.01 using
Klüberpaste UH1 96-402 from HILGE assembly
tool kit, pos. 6 fig 81.
Fig. 78
Suction cover
21. Fit the washers 0934.03 and the hexagon nuts
0927.00. Tighten the nuts 0927.00.
To tighten the nuts properly use a torque adjust-
ment of 20 Nm.
Fig. 79
Suction cover nuts
*
Tighten the domed nuts again 30 minutes after their
first tightening. Because the O-rings and joints re-
quire this much time to set.
22. Make sure the pump shaft turns smoothly.
Fig. 80
Pump shaft check
