GE Zoneline 1000 Series Use And Care Manual Download Page 2

Help us

 Safety

Energy-Saving

help you...

Instructions

Tips

Before using your
air conditioner, read
this book carefully.

It is 

intended to help you operate

and maintain 

your new air

conditioner properly.

Keep   handy for answers 

to your

questions.

If you don’t understand something

or need more help, write (include
your phone number):
Consumer Affairs
GE Appliances
Appliance Park

Louisville, KY 40225

Write down the model
and serial numbers.

You’ll find them on a label behind

the room cabinet.

These numbers are also on the
Consumer Product Ownership
Registration Card that came with
your air conditioner. Before sending
in this card, please write these
numbers here:

Model Number

Serial Number

Use these numbers in any
correspondence or service calls
concerning your air conditioner.

If you received a damaged air
conditioner,  
immediately contact
the dealer (or builder) that sold
you the air conditioner.

Read 

 

 before

using this 

appliance.

When using this appliance, always
exercise basic safety precautions,
including the following:

● 

Use this appliance only for its

intended purpose  as described in
this Use and Care Book.

● 

This air conditioner must be

properly installed in accordance
with the Installation Instructions
before it is used.

. Never use an 

 cord

with this appliance.

 THESE

INSTRUCTIONS

 Keep the air filter clean. (See

instructions on page 5.)

● 

For most efficient operation,

keep vent in closed position except
when you want to let outside air
enter the room.

● 

Don’t let the room get too hot or

too cold. Whenever possible, turn
the unit on before the room heats
up or cools off. If you don’t, the air
conditioner will take longer to
produce the desired comfort
condition.

● 

Keep windows and doors closed.

Conditioned air escapes when
they’re open.

● 

Keep furnace floor registers and

cold air returns closed when cooling
is desired. Conditioned air can
easily escape through them.

● 

Don’t let drapes or furniture block

the front of the unit and restrict air
flow when it is operating.

● 

It’s best to operate your air

conditioner at high speed during
extremely hot or cold weather.

● 

Keep the outdoor condenser coil

clean. (See page 5.)

● 

Turn the air conditioner off

before vacations or extended
absences.

Save time and money.
Before you request service,
check the Problem Solver on
page 6. It lists causes of minor
operating problems that you
can correct yourself.

2

Summary of Contents for Zoneline 1000 Series









Reviews: