ZP3 Fire Control Panel User Guide
Operation
The main menu is the entry point to all of the user operator accessible software functions. To
access the main menu:
1. Press the MENU key (
) on the keypad. The display shows the following (see Figure 14):
Figure 14: Main menu
2. Press <1. Operator> on the keypad to enter the
Operator Menu
. The following screen appears
Figure 15: Operator menu
The menu name is displayed on the top line, and the menu items are shown with numbers
alongside. Menu items are selected by pressing the numeric key that matches the item number.
Selecting a menu item may cause another menu to appear or may carry out a particular
function. The operator may be prompted to enter the required information via the keypad.
Any menu can be cancelled and the previous menu presented by pressing the ESC key (
). The
ESC key is used to cancel or abort the current activity and return to the previous activity.
Exit the menu system completely by pressing the HOME key (
). This returns the panel to its
normal operation display or event screen. To prevent a system from being inadvertently left in a
menu, a time-out is built into the menu system, i.e. from the last time a key was pressed. In menu
selection, the time-out is approximately 45 seconds, and if a software function has been started
and not completed, then it is 12 minutes.
Menu structure
The operator menu structure is displayed as a menu tree, and shown in Figure 16. Items that are
grouped together are options that appear together on a menu, and items that are open-ended
implement a software function.
Page 22
Revision 11 (05/01/2010)
