ZP3 Fire Control Panel User Guide
Display of alarms
Overview
See Figure 9. Alarms are displayed on the panel fascia, and the fascia of remote display panels,
audibly by means of a built-in panel buzzer, and visually by means of illuminated LED indicators
and descriptive text on the LCD Display.
Figure 9: ZP3 Fire panel controls and indicators
Fire alarms
Fire alarms are shown by means of the common FIRE LED’s, the zone LED's, and the LCD Display.
The operation of functions arising from the fire alarm, such as sounders, control outputs, remote
manned centre alarms, etc, are shown by means of status indicators.
Fault alarms
Fault alarms are shown by means of the common FAULT LED's and the LCD Display. The
operation of functions arising from the fault alarm, such as control outputs, remote manned
centre alarms, etc, are shown by means of illuminated status indicators.
Disabled alarms
Events such as zones, sensors, or sounders being disabled are shown by means of the common
DISABLED LED's, and the LCD Display. The LCD Display can be cleared with the reset button, but
as long as the devices remain disabled, the common disabled indicator remains lit. Illuminated
status indicators indicate details of the disabled devices.
Other alarms
Alarms that don’t fall into any of the above three categories (for example, "pre-alarms") are
shown by means of the common OTHER LED and the LCD Display. Applicable details of the
alarms are shown by means of illuminated status indicators.
Revision 11 (05/01/2010)
Page 13
