Doc. No. 503-0800ZE-M-01
ZP3-ECU Maintenance Manual
Page ii
Issue 1 (01/08/2006)
Copyright © 2006, GE Security B.V. All rights reserved.
This document may not be copied or otherwise reproduced, in whole or in part, except as specifically permitted under
US and international copyright law, without the prior written consent from GE.
Document number/revision: 503-0800ZE-M-01 (August 2006)
THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. GE ASSUMES NO RESPONSIBILITY
FOR INACCURACIES OR OMISSIONS AND SPECIFICALLY DISCLAIMS ANY LIABILITIES, LOSSES, OR RISKS, PERSONAL OR
OTHERWISE, INCURRED AS A CONSEQUENCE, DIRECTLY OR INDIRECTLY, OF THE USE OR APPLICATION OF ANY OF THE
CONTENTS OF THIS DOCUMENT. FOR THE LATEST DOCUMENTATION, CONTACT YOUR LOCAL SUPPLIER OR VISIT US
ONLINE AT WWW.GESECURITY.NET.
This publication may contain examples of screen captures and reports used in daily operations. Examples may include
fictitious names of individuals and companies. Any similarity to names and addresses of actual businesses or persons
is entirely coincidental.
GE and the GE monogram are registered trademarks of General Electric.
This product and logo are registered trademarks of GE Security.
Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or
vendors of the respective products.
Use this product only for the purpose it was designed for; refer to the data sheet and user documentation. For the
latest product information, contact your local supplier or visit us online at www.gesecurity.net.
The European directive “Waste Electrical and Electronic Equipment” (WEEE) aims to minimise the impact of electrical
and electronic equipment waste on the environment and human health. To conform with this directive, electrical
equipment marked with this symbol must not be disposed of in European public disposal systems.
European users of electrical equipment must now return end-of-life equipment for disposal.
Further information can be found on the following website:
