12
Installation
36" Stainless Bottom Mount Refrigerators
9
Mount
Top Grille
Panel
For shipping purposes, the top case trim is
secured at 84" installation height.
To raise case trim to 84-1/2" installation
height or to lower case trim to 83-1/2":
• Loosen 2 screws on both sides and raise or
lower the top case trim to meet soffit
height or to the top of adjacent cabinets.
• Tighten all 4 screws.
• Mount the grille panel by dropping into
slots on the case trim.
The grille panel assembly is factory set for an
84" installation height. If installation height
is 83-1/2" or 84-1/2", order ZGCSS36RH
(right hand) or ZGCSS36LH (left hand)
grille panel kit.
Step
Important:
Maintain 1-1/2" min. gap between top of
doors and bottom of grille panel.
Screws
Top
Case
Trim
Raise To
Installation
Height
1-1/2"
min.
gap