manualshive.com logo in svg

GE ZIC36ON Series, Technical Service Manual

Share
Download
GE ZIC36ON Series Technical Service Manual Download Page 11

– 9 –

CABINET

Cabinet

The outer case is made of galvanized steel.  The
fresh food and freezer liners are painted metal with
a smooth finish.  Individual fresh food and freezer
compartments provide separation and enhanced
individual control between the compartments. The
metal liner provides a thermal break between the
interior of the refrigerator and freezer
compartments and reduces the transfer of heat
from the room into the fresh food and freezer
compartments. The liner is not removable or
replaceable.

Machine Compartment

The machine compartment is located on the top of
the unit and has a movable chassis that can be
extended from the front of the unit to provide
access to the refrigeration system and
components.

Caution: Avoid kinking the refrigeration lines when
sliding the chassis out and back in.

To extend the chassis:

1. Raise the grille panel to stop position.

2. Remove the wire guard and rocker switch

panel.

3. Disconnect the door closure mechanism

spring from the pin and remove the pin by
turning it counterclockwise.

4. Remove 3 screws securing the water filter

mounting bracket.

5. Remove 3 (7/16-in.) bolts from chassis

bottom.

6. Loosen 2 (7/16-in.) chassis track bolts.

7. Pull the chassis forward until it reaches the

stops in the tracks, working the refrigeration
tubing as you pull the chassis out.

Note. When sliding the chassis back into position,
be certain the lines and wiring have not fallen
behind the chassis.

Bolts

Track Bolt

Right Side of Machine Compartment

Bolt

Track Bolt

Screws

Left Side of Machine Compartment

Raise
Grille
Panel
to Stop
Position

Remove 2 Screws
Each Side to

Summary of Contents for ZIC36ON Series




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands