(continued)
●
Keep
laundry aids (such as
bleaches, fabric
of
a locked cabinet.
Observe warnings
labels to avoid personal
●
Keep
area around and underneath
appliances
from
accumulation combustible materials,
such as lint, paper, rags, chemicals,
●
Keep the
around your appliances clean and
dry to
possibility of slipping.
●
To minimize
of electric
shock, unplug this appliance from the
power supply before attempting any
maintenance cleaning (except
removal and cleaning of the lint filter).
NOTE:
Cycle Selector
an
position does NOT
disconnect the appliance from
power supply,
●
not operate this appliance it is damaged,
malfunctioning, partially disassembled, or has
missing or
parts, including a damaged
cord or
●
Never
or
on the washer top,
●
Do not wash fiberglass articles your washer.
Skin irritation could
from the remaining
particles that may be picked up by clothing
during subsequent washer use.
●
laundry process
reduce
of fabrics.
manufacturer’s care instructions
should be followed
carefully.
For
●
Do not leave washer up during cycle.
This will stop the wash and spin action and
prevent completion of the cycle.
not
controls.
If your clothes and household items don’t look clean
and fresh after washing, you will probably rewash
them.. and that means you’ll waste energy. Remember
to sort your clothes carefully, and load them properly,
select correct cycles, use enough detergent and choose a
water
temperature warm enough to release and get rid
of soil.
●
Try to wash less often. Save articles of the same
type of fabric until you have a full load.
●
If you must wash smaller loads, adjust the amount
of water. Small loads should have lower water
levels.
Always rinse in cold water. The temperature of the
rinse does not affect cleaning.
●
Wash in off-peak utility hours. Your local utility can
tell you which are the
hours.
●
Use your washer’s Normal Spin. This will remove
more water during spin, which will shorten drying
cycle to save more energy.
4