How to Use the Bleach Dispenser
Use this dispenser with
●
Measure bleach carefully.
liquid bleach only.
If you prefer to
See manufacturer’s instructions.
use powdered
●
Pour measured amount of liquid bleach directly
bleach, pour it
into the wash
basket along with
your detergent.
into bleach dispenser.
●
Do not overfill or allow dispenser to
Avoid splashing. Undiluted bleach can cause
damage.
not pour
bleach
●
Never pour undiluted liquid bleach directly
into the bleach dispenser.
onto clothes or into the wash basket.
How to Use the Fabric Softener Dispenser
●
Position the Fabric Softener
Dispenser on the agitator.
●
Pour manufacturer recommended
amount of fabric softener into a
one cup (240
measuring cup.
●
Add enough water to fill the cup 1/2 full.
●
Pour the diluted softener into the dispenser.
●
The fabric softener will automatically be dispensed at
proper time.
●
Do not stop the washer during the first spin.
This
cause the dispenser to empty too soon.
●
Do not use the Fabric Softener Dispenser with
the Soak or PreWash cycle.
●
If the dispenser gets clogged, soak it in a solution of
one cup (240 ml) water and one cup (240 ml) alcohol.
How to Use the Soak Cycle
●
Soak: Turn the Cycle Selector knob to soak. Start the
NOTE: For an extended soak, allow the washer
washer. Add pre-measured detergent or soak product;
to fill and agitate for a few minutes dissolve the
add clothes.
soaking agent. Then push in the Cycle Selector knob
to stop the washer (keep
closed) and allow to soak
for as long as desired. After desired soak period, pull
out the Cycle Selector knob to complete the cycle.
ENERGY-SAVING
If your clothes and household items don’t look clean and
fresh after washing, you will probably rewash them.. and
that means you’ll waste energy. Remember to sort your
clothes carefully, and load them properly, select correct
cycles, use enough detergent and
a water
temperature warm
rid oj’.voil.
●
Try to wash less often. Save articles of the same
type of fabric until you have a
load.
●
you must wash smaller loads, adjust the amount
water. Small loads should have lower water levels.
●
rinse in cold water. The temperature of
the rinse does not affect cleaning.
●
Wash in off-peak utility hours. Your local utility
can tell you which are the off-peak hours.
Use your washer’s Normal Spin. This will remove more
water during spin, which will shorten drying cycle to
save more energy.
7