
How to Partially Restore Clothes
Once clothes have developed limestone deposits,
they may @ally restored by soaking in a solution
of two cups
(480
ml) of
in
gallon (3.8 liters)
of hot tap water for 15 minutes. USE A
CONTAINER. Then wash clothes in
washer
using detergent.
CAUTIONS:
●
Do not use vinegar soak solution in washer.
The acidic action of the vinegar may damage
the porcelain.
●
Vinegar soak solution may reduce the
wrinkle-resistance of permanent press fabrics.
●
Vinegar soak may damage the dyes in some fabrics.
HOW MUCH DETERGENT
YOU USE?
The
use
of a sufficient amount of detergent is one of the most
important things you can do to make sure your wash comes out clean.
Amount required varies
according to:
1. Water hardness
2. Amount of soil
3. Size of load
of detergent
5. Wash temperature
Use
more detergent you have...
1. Hard water
2. Large loads
3. Greasy or oily soils
4. Lower wash temperature
5. Low phosphate detergent
If the recommended amount of
detergent produces too many suds,
switch to a low
detergent
brand, and follow instructions
on package.
Using too little
detergent is a
common cause
of laundry
problems. Always —
measure detergent
in a standard measuring cup.
Recommended Amount of Detergent for Average Soil Load
I
I
I
Water Level Setting
Water
Hardness
VERY HARD
10-20 Grains
HARD
Powder
4-10 Grains
O-4 Grains
Large
2 cups
(480 ml)
cups
(420
1 cup
(240 ml)
Medium
Small
cups
I cups
(420 ml)
(300 ml)
cups
cup
(360
(180 ml)
1 cup
1/2 cup
(240 ml)
(120 ml)
Concentrated
0-10 Grains
cup
cup
l/2 cup
(240 ml)
(180 ml)
(120 ml)
How to use
granular or powdered:
For best results, add detergent
to the wash basket before loading
clothes. If you load your clothes
first, add detergent next to
the agitator.
If your detergent doesn’t dissolve
well,
the detergent in
hot water, then pour directly into
the wash basket.
1. Use recommended amount
of detergent for your load
and water hardness as shown
in guide at left.
2. When using other detergent
types—low and normal suds,
powders, liquids, non-phosphate
powders—follow directions
on package.
3. For hard water treatment, see
Hard Water Guide.
LIQUID
O-IOGrains
FOLLOW
DIRECTIONS
13