GE WNCD2050A0, Technical Service Manual

Page: 17 / 40

– 15 –
CUSTOM 1 and CUSTOM 2 (on some models)
Set up your favorite combination of settings and save them here for one-touch recall.
These custom settings cannot be set while a cycle is in progress.
To store a custom combination of settings:
1. Select a
O
NE
T
OUCH
setting.
2. Change
LOAD SIZE, SOIL LEVEL, TEMPERATURE,
or
SPEED
to fit your needs.
3. Select any
OPTIONS
you want.
4. Press and hold the
CUSTOM 1
or
CUSTOM 2
pad until the washer beeps to store
your selection.
To recall your stored combination:
Press the
CUSTOM 1
or
CUSTOM 2
pad, then press
START/PAUSE
.
NOTE: DELAY 1-8 HRS.
cannot be used in
CUSTOM 1
and
CUSTOM 2
settings.
To reprogram the custom settings:
Repeat steps 1–4 above.
DRAIN & SPIN
DRAIN & SPIN
any cycle at any time.
Automatic DRAIN & SPIN setting:
Drain & Spin
Drain & Spin any cycle at any time.
Custom 1 and Custom 2 (on some models)
Set up your favorite combination of settings and save them here for one-touch
recall. These custom settings cannot be set while a cycle is in progress.
To store a custom combination of settings:
1. Select a One Touch setting.
2. Change Load Size, Soil Level, Temperature, or Speed to fit your needs.
3. Select any Options you want.
4. Press and hold the Custom 1 or Custom 2 pad until the washer beeps to
store your selection.
To recall your stored combination:
Press the Custom 1 or Custom 2 pad, then press Start/Pause.
Note: Delay 1-8 hours cannot be used in Custom 1 and Custom 2 settings.
To reprogram the custom settings:
Repeat steps 1-4 above.