r
●
●
PROBLEM
(continued)
PROBLEM
I
POSSIBLE CAUSE
WASHER IS
●
Make sure
is level and firm to
floor
rubber foot pads in
and front jam nuts tight. See
your
●
A sharp, distinctive sound will be heard at
end of each spin
as
motor stops
spin brake
the transmission “locks in.”
sound
is normal.
●
Heavily unbalanced loads can cause the washer to vibrate excessively during
spin, and
cause it to move from its original position. In extreme
(usually occurs when washing a single, heavy item or a small load
water
level is set higher than necessary), the spin basket may strike the
tub,
creating a loud but harmless noise. To correct, open
lid and redistribute the
evenly about the wash basket.
the lid
restart.
WASHER PAUSES
* Washer normally pauses between washing
as between
and
spin or between spin and rinse.
need more
toll free: GE Answer Center
@
/ 800.626.2000/consumer information service
CARE
USER MAINTENANCE INSTRUCTIONS
The
The porcelain is self-cleaning. Leave lid open after
washing to allow moisture to evaporate. Do not use
harsh or gritty cleansers.
The Exterior.
Wipe off any spills of washing compounds. Wipe
or dust with damp cloth. Try not to hit surface with
sharp objects.
To Store Washer.
Ask service technician to remove water
from drain pump and hoses to prevent freezing,
Do not store the washer where it will be exposed
to the weather.
For Long Vacations.
Be sure water supply is shut off at faucets
and drain all water from hoses if weather will
be below freezing.
26