GE WBSR3000GWS Owner'S Manual Download Page 13

PERFORMANCE (cont.)

Possible Causes

What To Do

Grayed or yellowed 

Not enough detergent

Use more detergent (especially with larger loads). Be 

clothes

sure to follow detergent manufacturer’s directions.

Hard water

Use a water conditioner like Calgon brand or install 
a water softener.

Water is not hot enough

Make sure water heater is delivering water at 
120°F–140°F (48°C–60°C).

Washer is overloaded

Select load size to match clothes load.

Detergent is not

Add detergent as wash basket fills with water before 

dissolving

you load clothes.

Dye transfer

Sort clothes by color. If fabric label states

wash separately,

unstable dyes may be indicated.

Lint or residue on

Clothes are air or line dried

If you do not dry your clothes with a clothes dryer, your

clothes

clothes may retain more lint.

Incorrect sorting

Separate lint producers from lint collectors.

Washing too long

Wash small loads for a shorter time than larger loads.

Detergent not dissolving

Add detergent as wash basket fills with water, before you 
load clothes.

Try a liquid detergent.

Use warmer water temperature.

Overloading

Load clothes no higher than the top row of holes in the 
washer basket. 

Make sure load size selected matches clothes load size.

Incorrect use of fabric softener

Check fabric softener package for instructions and follow 
directions for using dispenser.

Pilling

Result of normal wear on

While this is not caused by the washer, you can slow the 

poly-cotton blends and

pilling process by washing garments inside out.

fuzzy fabrics

Snags, holes, tears, rips

Pins, snaps, hooks, sharp

Fasten snaps, hooks, buttons and zippers.

or excessive wear

buttons, belt buckles,

Remove loose items like pins, objects in pockets

zippers and sharp objects

and sharp buttons.

left in pockets

Turn knits (which snag easily) inside out.

Undiluted chlorine bleach

Check bleach package instructions for proper amount.

Never add undiluted bleach to wash or allow clothes 
to come in contact with undiluted bleach.

Chemicals like hair bleach

Rinse items that may have chemicals on them before

or dye, permanent wave

washing.

solution

Wrinkling

Improper sorting

Avoid mixing heavy items (like work clothes) with 
light items (like blouses).

Try a fabric softener.

Overloading or

Load your washer so clothes have enough room 

incorrect water level

to move freely with water covering all of the clothes.

Incorrect wash and

Match Cycle selection to the type of fabric you are

dry cycles

washing (especially for easy care loads).

Repeated washing in

Wash in warm or cold water.

water that is too hot

Consumer Support

Tr

oubleshooting T

ips

Operating Instructions

Safety Instructions

ge.com

13

Summary of Contents for WBSR3000GWS

















Reviews: