GE WavePro WPS32SUBSH1, Installation Instructions

Page: 2 / 2

2
lock washers (item #5), flat washers (item #3),
and 1 taptite (item #7) with flat washer (item #3)
as shown in Fig. 2. (Leave hardware loose.)
7. Move and hold slide assembly back.
8. Extend key lock bolt.
9. Release slide assembly and allow it to return.
10. Torque hardware to 7-9 Ft-Lbs.
11. Retract key lock bolt.
12. After assembly, assure slide assembly moves
freely.
Fig. 2 Fig. 3
Number of
locks & keys
Key removable when: Kirk key
interlock
Key Location Bolt Location
1 Extended KR1007510
2
Lower
Upper Extended
Withdrawn KR1007521
2
Lower
Upper Extended
Extended
KR1007520
These instructions do not purport to cover all details or variations in equipment nor to provide for every possible
contingency to be met in connection with installation, operation or maintenance. Should further information be desired or
should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should be
referred to the General Electric Company.
GE Industrial Solutions
41 Woodford Ave.
Plainville, CT 06062
www.geindustrial.com
© 2012 General Electric Company
All Rights Reserved
DEH – 158 R04 06/12
Fixed Cam
If fixed cam is adjusted, drill
hole and re-install roll pin.