GE Vivid S60N, Basic Service Manual

Page: 398 / 478

D
IRECTION
FR091521, R
EVISION
1 V
IVID
S60N/V
IVID
S70N B
ASIC
S
ERVICE
M
ANUAL
8-168 Section 8-6 - Mechanical Platform Components - Replacement Procedures
P R E L I M I N A R Y
8-6-12-5-1 Routing the Probe Cables
When routing the probe cables, it is important to lead the cables upwards from the system’s connecting
ports as shown in
Figure 8-203 . Always ensure that the cables do not drag on the floor and are
adequately secured by the Probe Cable Holder bracket and Left and Right Cable Hooks.
NOTE: Image for illustration purposes only (pending update).
Observe the following practices:
1.) Lead the right probe cables upwards and thread them via the left and right cable holders as shown
in Figure 8-203 .
2.) Open the cable gate ( Figure 8-204 ) on the cable holder and slide the cables into the cable holder.
Figure 8-203 Probe Cables Routed Correctly through Probe Cable Holder Bracket and Cable Hooks
Figure 8-204 Opening the Cable Gate on Probe Cable Holder
Right Cable Hook
Probe Cable
Holder Bracket
Left Cable Hook