GE Vivid S60N, Basic Service Manual

Page: 266 / 478

D
IRECTION
FR091521, R
EVISION
1 V
IVID
S60N/V
IVID
S70N B
ASIC
S
ERVICE
M
ANUAL
8-36 Section 8-3 - Control Console Components - Replacement Procedures
P R E L I M I N A R Y
8-3-3 Touch Screen Rear Cover Replacement Procedure
8-3-3-1 Tools
Phillips screwdriver.
8-3-3-2 Time Required
15 min
8-3-3-3 Preparation
Shut down the Vivid™ S60/Vivid™ S70 ultrasound unit, as described in Power Shut Down on page 4 - 7 .
8-3-3-4 Touch Screen Rear Cover Removal Procedure
Note: The Touch Screen Rear Cover is fastened to the back of the Touch Screen by 3 screws
through securing tabs located on the base of the cover and 2 screws at the top - Figure 8-34 .
1) Check the console is raised to the maximum up position.
Make sure it is aligned in the central position (not pulled to one side or the other).
2) Remove the Touch Screen Service Cover:
3.) Remove the 3 securing screws from the base of the cover - Figure 8-37 .
FRU Part #
Refer to
Table 9-9
on page 9-8
.
Figure 8-36 Touch Screen Rear Cover - Securing Tabs and Screws
• Touch Screen Service Cover Removal Procedure on page 8 - 34
Figure 8-37 Removing the Rear Cover (Base) Securing Screws
Internal View External View