GE Vivid q N, Service Manual

Page: 111 / 698

GE
D
IRECTION
FQ091019, R
EVISION
2 V
IVID Q
N S
ERVICE
M
ANUAL
Chapter 3 - System Setup 3-39
3.) Connect the other end of the USB cable to the Vivid q N USB port at the rear of the Vivid q N - see
Figure 3-31 .
4.) Plug the power supply into the mains power supply.
5.) Insert the DVD Patch CD R2423877 into the DVD / CD-RW Drive and follow the on-screen
instructions to load the software patch.
6.) When done, remove the CD from the drive.
7.) Perform the following tests:
a.) Insert a CD-R disk in the DVD / CD-RW Drive.
b.) Eject and remove the CD-R disk to check the eject mechanism functions properly.
NOTE: In the event that problems are experienced when exporting to DVD media, the error message
"Failed to finalize media" is displayed. It is therefore recommended to use the Medical Grade
5V Power Supply
for DVD Samsung Universal (P/N 2421169) and connect it to the peripheral outlet on the
SafeLock Cart, as shown in
Figure 3-32
.
Figure 3-30 Mini USB Port on Samsung DVD/CD-RW Drive
Figure 3-31 USB Ports Located at Rear of the Vivid q N
Figure 3-32 Samsung DVD/CD-RW Drive Connected through 5V Power Supply
Mini USB Port
USB Ports