GE Vivid in, Service Manual

Page: 520 / 740

GE H
EALTHCARE
D
IRECTION
FQ091013, R
EVISION
1 V
IVID
I
N AND
V
IVID Q
N S
ERVICE
M
ANUAL
7-168 Section 7-8 - Automatic Error Log
7-8-2-1 Formatting a DVD/CD
Prior to exporting logs or any data onto a DVD/CD, the media must be formatted, as described below.
To Format a DVD/CD:
1.) Connect the DVD/CD-RW media drive to the USB port and make sure the DVD/CD-RW power
switch on the rear of the drive is set in the
External
position, as shown in Figure 7-145 , below.
2.) Insert the blank DVD/CD media into the DVD/CD-RW drive tray.
3.) On the Vivid i n/ Vivid q N system, press the
<Config>
key.
4.) Select the
Connectivity
Tab and activate the
Tools
Tab.
5.) Under Removable Media , select the media type
CD/DVD Writeable
from the Media drop-down
menu, as shown in Figure 7-146 .
6.) Click the
Format
button.
Figure 7-145 Power Switch in External Position
NOTICE
IMPORTANT: Use only CD-R, DVD-R or DVD+R media from a reputable vendor and only
high-grade media types.
Figure 7-146 Connectivity - Tools - Removable Media
External Power OFF Internal