manualshive.com logo in svg

GE VISION Line ES44AC, Owner'S Manual, Page: 17 / 40

Share
Download
GE VISION Line ES44AC Owner'S Manual Download Page 17

17

LEGACY Control System operations

THE SPEED BAR

Selection of Preset Speeds

T

he Speed Bar is used to select a new touch-screen Icon Control set. This set of touch-

screen keys is used to select preset speeds. Pressing AUX-1 returns you to the standard 

control panel.

17.  Press, hold and release the Preset Speed icons one by one. Experiment.
18.  The speed of the engine 

changes with each press 
and release of a different 
Preset Speed key.

19.  You can also use the Velocity 

Throttle and other action 
controls in this mode and 
continue to use Preset 
speeds at the same time.

20.  Repeat step 17.
21.  Press AUX-1 to leave the 

Preset speed mode and 
return to the Standard 
Control Panel.

Note:

 Pressing and holding a 

preset speed button triggers 
corresponding dialog between 
the dispatcher and locomotive 
crew. Tapping a preset speed 
button changes the locomotive 
speed without dialog.

22.  Press the speed bar to toggle between the Speed Control Panel and the Standard Control 

Panel.

At this point you know the basics of how to operate your LEGACY Control system. There is 

a lot of fun waiting as you experience the interaction of the controls and the touch-screen. 

Be sure to read the entire Lionel Legacy Control System Manual to get the most from your 

Lionel products.

See reference numbers 17, 18, 19, 20, 21, and 22

6-28306 Hybrid.indd   17

12/16/09   2:56 PM

Summary of Contents for VISION Line ES44AC









































Reviews:

No comments