GE VG4045, User Manual

Page: 36 / 56

VCR Features
34 Chapter 4
3. If you want to search through a certain number of index marks, press two
number buttons to enter the number of marks you want to search. Press
CLEAR on the remote to correct an entry.
4. Press FORWARD (FWD) to search forward or REVERSE (REV) to search in
reverse. The VCR will locate your index mark and begin playback. If you
did not enter a specific index number, the VCR will locate the next index
mark and begin playback.
5. Press STOP to stop index searching.
Notes : Certain index marks may be missed by the VCR including:
• Marks too close to the current location of the tape.
• Marks at the beginning of a recording lasting five minutes or less.
• Index marks that start at the beginning of the tape.
Zero Search
The Zero Search feature enables the VCR to quickly return to the 0:00:00
counter reading from anywhere on the tape. This is a convenient way to play a
segment of the tape several times.
1. Cue a tape to the spot you wish to return to.
2. Press the CLEAR button twice to reset the counter to 0:00:00.
3. Continue playing the tape.
4. Press the STOP button.
5. Press the SEARCH button repeatedly until the ZERO SEARCH menu
appears on screen.
6. Press the REVERSE button (REV on the VCR) to return to 0:00:00 on the
tape.
7. Repeat as necessary.
INDEX SEARCH
Searching for
index marks...
Press STOP to cancel
ZERO SEARCH
Current tape counter is
2:17:25
Press REV to go to
0:00:00
Press SEARCH to exit
INDEX SEARCH
Searching for
index number 12...
Press STOP to cancel