23
References
Location of Controls
Back Panel
CH3 CH4
Switch
Selects the channel to which you tune the TV to
see the VCR picture if you connect the VCR
using one of the basic hookups.
ANT
(Antenna) IN Connector
Receives a signal from an antenna or cable
system when attached.
RF OUT
Connector
Passes signal to TV using the cable supplied.
VIDEO IN
and
AUDIO IN
Jacks
Receives signals from another component like a
VCR or camcorder when it is connected to these
jacks. Use
INPUT
on the remote to select.
VIDEO OUT
and
AUDIO OUT
Jacks
Sends signals from VCR to another component like
a VCR or camcorder when it is connected to these
jacks.
RF OUT
ANT IN
CH 3
IN
AUDIO
VIDEO
OUT
CH 4
