Hint!
Carry out regular checks. This way you can ensure that these
measures are actually observed.
2.3
Subsequent changes
No technical modifications should ever be made to this component. Otherwise
you will have to undergo a new conformity process in accordance with the EC
Machinery Directive on your own.
In general, only original spare parts supplied by GEA Tuchenhagen GmbH
should be fitted. This ensures that the component is always operating properly
and efficiently.
2.4
General safety instructions and dangers
The component is safe to operate. It was built according to state-of-the-art
science and technology.
Nevertheless, dangers can arise from the component, if:
•
the component is not used as intended
•
the component is used improperly
•
the component is operated under impermissible conditions
2.4.1
Principles for safe operation
Dangerous situations during operation can be avoided by safety-conscious and
proactive behaviour of the staff.
To ensure safe operation of the valve the following principles apply:
•
The Operating Instructions must be kept ready to hand at the valve's place of
use. They must be complete and in clearly legible form.
•
Only use the valve for its intended use.
•
The valve must be functional and in good working order. Check the condition
of the valve before starting work and at regular intervals.
•
Wear tight-fitting work clothing for all work on the valve.
•
Ensure that nobody can get hurt on the parts of the valve.
•
Immediately report any faults or noticeable changes on the valve to the
person responsible.
•
Never touch the pipes and the valve when these components are hot! Avoid
opening the valve unless the process plants have been emptied and
depressurised.
•
Observe the accident prevention regulations and all local regulations.
2.4.2
Environmental Protection
Harm to the environment can be avoided by safety-conscious and proactive
behaviour of the staff.
Safety
Subsequent changes
430BAL011074EN_5
12
08.11.2021
