manualshive.com logo in svg

GE V7768, Hardware Reference Manual

Share
Download
GE V7768 Hardware Reference Manual Download Page 10

10  V7768/V7769 Hardware Reference Manual

Embedded Features of the V7768/V7769

•  Remote booting out the front panel only

•  Up to 8 GByte of bootable CompactFlash (optional)

•  PCI-X capable PMC site with VITA 35 P2 I/O (factory populated on V7768 

and main board of V7769)

•  VITA 1-1994 with byte swap

•  32 KByte NVRAM

•  Software-selectable Watchdog Timer with reset

•  PMC expansion site 

Chapter 3:  Embedded PC/RTOS Features

The embedded features of the V7768/V7769 are described in Chapter 3 of this 
manual.

The V7768/V7769 are suitable for use in a variety of applications, such as: 
telecommunications, simulation, instrumentation, industrial control, process 
control and monitoring, factory automation, automated test systems, data 
acquisition systems and anywhere that the highest performance processing 
power for VME in a single or dual slot is desired.

Summary of Contents for V7768





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands