GE UVW8364 Owner'S Manual & Installation Instructions Download Page 5

Page: 5 / 54

49-2000708 Rev. 5

Controls

USING THE HOOD:

Controls

Chef Connect Operation Bluetooth

Connection

To pair with another device:

To start the pairing process on the hood, press and hold
the

Light

button for 3 seconds. The backlight for all the

icons will flash until the hood is paired with the range or
other device. If the pairing is successful, the backlights of
all buttons will flash simultaneously three times and then
turn off. The hood lights and fan default sync setting will
be activated.

It will time out after 2 minutes if the pairing is not
completed, after which the pairing sequence will need to
be restarted.

To cancel pairing:

To cancel the pairing, hold the

Light

button down for 3

seconds and then turn off the hood.

Default Sync Settings:

The factory default setting for the light will be the brightest.

The factory default setting for the fan sync will be

OFF

The user can change the Default Sync Settings by
pressing and holding the

Med

button for 3 seconds.

This will enter the Default Settings Mode. Once in
this mode, the backlights for all buttons will blink on/
off indefinitely and the fan and light will switch to the
current Default Sync Setting, so the user knows what the
current default value is. At this time, set the light and fan
to the desired default levels. Once the user is satisfied
with the selection, press and hold the

Power

button

for 3 seconds. This will exit this mode. At that time the
backlights will stop blinking and the state of the fan and
light will change back to their prior state before entering
the Default Settings Mode.

Chef Connect

1. Rangehood Control Panel:

The control panel

is located under the front edge of the canopy. The
position and function of each control button are noted
below.

2. Fan

On/Off:

On/Off switch for the fan. The fan

can be operated by pressing any of the fan setting
buttons. Hold

Power

for 3 seconds to activate Delay

Off feature, which automatically turns the fan off after
15 minutes. Low, Med and High buttons LEDs will
rolling blink to indicate Delay Off feature is activated.

3. Fan

Settings:

Speed control for fan. Fan speed is

QuietBoost™ Technology.

This unique

technology is designed to minimize ventilation noise
and enhance motor efficiency for a peacefully-quiet,
odor-free kitchen. Press the button

Low

for LOW

speed,

Med

for MEDIUM speed, and

High

for HIGH

speed. Hold down the High button for 3 seconds to
activate the Boost speed that will run for 15 minutes.
High button LED will blink on/off to indicate Boost
feature is activated.

4. Light:

Off/On/Night Light switch for the LED lights.

Press the

Light

button to turn the lights on, again to

set the lights to night light setting, and again to turn
the lights off.

5. Chef Connect:

This is a Bluetooth

pairing

feature for use with other compatible Chef Connect
enabled products on a cooktop or range. When the
device is paired, the default sync settings will be
activated upon receiving a command from the range
or cooktop. To change the default sync setting, refer
to the Chef Connect section.

To pair devices, hold down the

Light

button for 3

seconds. To turn it back off, hold the button down for
another 3 seconds. See the Chef Connect section for
more details.

6. IR Sensor:

Remote control receiver when used

with remote control kit.

7. Wi-Fi:

Hold down the Low button for 3 seconds to

initiate the Wi-Fi connection. The Wi-Fi indicator light
turns on when connected, see the Wi-Fi Connect
section for details.

2ႇ

Low