GE UVD-XP3DNR(-P) User Manual Download Page 6

 

Product description 

The UVD-XP3DNR(-P) (rugged dome) color video cameras is a 24 VAC/12 VDC model. 
The cameras are equipped with a digital signal processor (DSP) for processing the 
video signal. 

Features 

Camera features include: 
•  Next-generation XPosure technology. 
•  Improved low-light performance and color balance. 
•  540 TVL lines color. 
•  Dynamic range 95 dB (typical), 120 dB (maximum). 
•  Preset modes optimized for various environments. 
•  Onscreen display interface. 

User guidelines 

Use the following guidelines: 
•  Program as many camera settings as possible before mounting the camera. Take 

appropriate safety precautions while completing programming after installation. 

•  Always use a 12 VDC or 24 VAC UL listed Class 2 power supply to power the 

camera. 
Do not use the camera outside the temperature range specifications: -57 to 122°F 
(-50 to +50°C). 

•  If the light source where the camera is installed experiences rapid, wide- 

variations in lighting, the camera may not operate as intended. 

WARNING:  

To reduce the risk of fire or electronic shock, do not expose the camera to 

rain or moisture and do not remove the cover or back. 

UVD-XP3DNR(-P) Camera User Manual 

Summary of Contents for UVD-XP3DNR(-P)



















Reviews: