10
49-55111-1
TROUBLESHOOTING TIPS
Troubleshooting Tips...
%HIRUH\RXFDOOIRUVHUYLFH
Problem
Possible Causes
What To Do
Compactor won’t
operate
Compactor is unplugged
Make sure the cord is plugged securely into a working
outlet.
Circuit breaker/fuse is
tripped/blown
&KHFNKRXVHFLUFXLWEUHDNHUVIXVHV5HSODFHIXVHVRUUHVHW
breaker.
Knob switch may not be in
the ON position
Make sure the switch is in the
ON
position.
Foot pedal may not be lifted
up long enough to start
cycle
Lift foot pedal up momentarily until compaction cycle starts.
Drawer may not be closed
Check to make sure the drawer is firmly closed.
Compactor has an
automatic thermal motor
reset
If you have just compacted repeatedly, this protector may
have opened the motor circuit. Wait a few minutes and
the motor reset will reclose automatically.
Drawer is hard to
close
Trash may have fallen
behind the drawer
Remove any trash.
Drawer will not
open
The ram is not all the way
up
Lift up on the foot pedal and release to allow ram to
complete a cycle.
Little or no apparent
compaction
Drawer is not full enough
7KHGUDZHUPXVWEHDWOHDVWIXOORIWUDVKEHIRUH\RXZLOO
VHHDQ\DPRXQWRIFRPSDFWLQJ7KHUDPGRHVQRWWUDYHODOO
WKHZD\WRWKHERWWRP7UDVKLQWKHERWWRPRIWKHGUDZHUZLOO
be crushed during later cycles.
Trash is stuck between ram
and basket
Remove any trash.
Summary of Contents for UCG1510N0II
Page 9: ...49 55111 1 9 Notes NOTES...
