GE UCC15, Owner'S Manual And Installation Instructions

Page: 12 / 68

12
49-60745-3
INSTALLING THE DOOR PANEL
The ice machine is supplied without a conventional
door covering, allowing the attachment of a stainless
steel door panel or a custom panel.
NOTE: If the door swing is to be changed, it needs to
be done BEFORE attaching the door panel.
Door Panel
)LQLVKHGVWDLQOHVVVWHHOGRRUSDQHOVZLWKKDQGOHVDUH
available from GE Appliances for attachment to the ice
machine. See
Accessories RQSDJH
A custom panel of wood or other material not
exceeding 15 lbs can be used and must follow these
guidelines:
ZLGWK´
KHLJKWEHWZHHQ´DQG´
WKLFNQHVV´WR´
For Custom Panel:
1. Measure overall height of the cabinet opening
ZKHUHWKHLFHPDFKLQHZLOOEHLQVWDOOHGIORRUWR
ERWWRPRIWKHFRXQWHUWRSHGJH
'HWHUPLQHGHVLUHGWRHNLFNKHLJKWERWWRPRIGRRU
WRWKHIORRU7KLVFDQEHHTXDOWRWKHDGMDFHQW
cabinet’s toekick height.
3. The clearance between the countertop and the top
RIWKHLFHPDFKLQHVKRXOGEHDWOHDVW´
4. Subtract the toekick height and the clearance from
the opening height to determine the height of your
custom door panel.
5. Cut the panel to the specified width and height.
6. Determine the top of the panel. Measure and mark
hole locations.
7. Drill pilot holes on the back of the panel at your
PDUNLQJV8VHDGULOOVWRSWRSUHYHQWGULOOLQJ
through the panel.
Cabinet
opening
´RUJUHDWHU
clearance
Toekick
height
´
´
´
´
´
´
´
Centerline
´
´
´
´
୉´
TYP
´
Installation Instructions
INST
ALLA
TION INSTRUCTIONS